Release notes InstalSystem 5: Difference between revisions

From HelpSystem
Jump to navigation Jump to search
No edit summary
No edit summary
Line 192: Line 192:
* [[Ground modeling]]
* [[Ground modeling]]
* [[Improvements of creating and managing Building units]]-->
* [[Improvements of creating and managing Building units]]-->
 
<!--
===RELEASE Rev. 20.2===
===RELEASE Rev. 20.2===
* Update of product catalogues.
* Update of product catalogues.
Line 426: Line 426:
* [[Heating/cooling zone build-up editor]] (actualized)
* [[Heating/cooling zone build-up editor]] (actualized)
* [[How to eliminate: "Cannot apply any pipe spacing"]]
* [[How to eliminate: "Cannot apply any pipe spacing"]]
 
-->
===RELEASE Rev. 16.1===
===RELEASE Rev. 16.1===
* Update of product catalogues.
* Update of product catalogues.

Revision as of 11:32, 15 February 2022

The article has been published on our website: Publication info.





RELEASE Rev. 16.1

  • Update of product catalogues.

Articles in HelpSystem:

RELEASE Rev. 16.0


Base module

  • Many elements of the installation (radiator, valve, pump, etc.) by default are inserted with label.
  • Possibility of precise control of pipe-runs arrangement, with different ordinates of the beginning and end of the pipe-run (case of pipe-runs carried out in inclined ceilings / walls).

Heating systems

  • Possibility to declare (General data window, Storeys management tab) the default distance from the floor separately of the supply and return pipe-runs.

Tap water systems

  • Possibility to declare (General data window, Storeys management tab) the default distance from the floor separately of the hot water, cold water and circulation pipe-runs.
  • Rearrangement of general data tabs.
  • New element of the installation - linear drain.

Flat stations

  • New module enabling the design of heating and water supply installations with the use of flat stations.

Articles in HelpSystem:

RELEASE Rev. 15.3

  • Update of product catalogues.

RELEASE Rev. 15.2

  • Update of product catalogues.

RELEASE Rev. 15.1

Base module

  • List of elements displayed in window Project browser ia automatically adapted to currently edited edit scope.
  • Catalogues window - tabs have been replaced by more precise catalogue filters
  • Window 3D view - possibility to display edges of the elements (available under the button Show edges/Hide edges in section View)
  • The ability to generate rooms, whose whole area is located in another room

Heating systems/ Cooling systems

  • Settings from tab have been moved to tabs: Distribution system-Types and default data and Radiators-Radiators/Radiator valves - types and default data (tab has been removed).

Heat loss

  • Enabling module Thermal calculations of building automatically switches common project setting: Method of calculating Φ into variant Calculated acc. to coefficient
  • Enabled correction of room internal temperature (θi,H) of standard room types.

Radiant systems

  • Manifold can be placed on a drawing in horizontal position or with upward outlet ports (configuration via new field in data table Orientation).
  • In the tab Additional options in General data window Specific market options has been added - possibility to choose the method of the calculation without a surplus to flow rate for compensation of heat flow to the other side of the Heating-cooling surface

Panel systems

  • Data table window of element Wall panel/Ceiling panel - Δpmax field has been added thus enabling control of maximum pressure drop in single panel or set of panels in serial connection.

Tap water systems

  • Water supply installations designing module - availability depending on package

Articles in HelpSystem:

RELEASE Rev. 14.2

  • The amount and content of neutral product databases available in different language versions has been unified, what will facilitate the transfer of projects between versions.

RELEASE Rev. 14.1

  • There were no significant functional changes in this release.

Articles in HelpSystem:

RELEASE Rev. 14.0

Modules:

Base module

  • A new access to PDF creation of text printouts. If the appropriate driver is installed in the system, the program uses it and provides the Print to PDF button directly in the print module's toolbar.
  • Possibility to declare the angle (rotation) of fittings (valve, filter etc.) relative to the pipeline axis (Window: Data table, field: Rotation angle).
  • New (separate) style and label for the Building contour element.
  • New field Distance from floor (set in storey data) in the data table of the element Pipe-run. Facilitates the control of the elevation of the network and allows correct copying of the repetitive installation to other floors.
  • Attractive graphic styles of certain elements in 3D view, including elements of the building structure.

Radiant systems

  • Graph of optimization presenting the quality of supply temperature (θs,H rad) in consideration of heating requirements of zones. Available in window General data on the tab: Sources, after first calculations.
  • New templates for Manifold table
  • New field Structural panel in window General data on the tab: Floor systems allows declaration of default system plate.

Heat loss

  • Improvement of the algorithm recognizing the area of the wall above the windows in a wall adjacent to ground, located entirely below the ground.

Articles in HelpSystem:

RELEASE Rev. 13.3

Modules:

Base module

  • Improvements of algorithm responsible for shaping the roof slopes

RELEASE Rev. 13.2

  • There were no significant functional changes in this release.

RELEASE Rev. 13.1

Modules:

Base module

  • Rearrangement of icons in Construction

Radiant systems

  • Reconstruction and improvements of Interactive radiant systems calculations

RELEASE Rev. 13.0

Modules:

Base module

  • Headers of result tables can be locked and visible while scrolling tables.

Heat loss

  • Possibility to assign thermal partition definition (with defined U value) to construction partition of the same type, irrespective to its thickness.

Radiant systems

  • Pipe-feeds for underfloor heating/cooling system can be laid in insulation layer (below heating/cooling pipes in the screed)
  • Possibility to change orientation (vertically or horizontally) of the Mixer / Pump unit .
  • New label for element Mixer / Pump unit .
  • Mixer / control unit chart
  • Improvements of algorithm which determines supply temperature for radiant systems.
  • Improvements of algorithm which divides element Heating/Cooling Zone into Heating-cooling surface.
  • Diagnostics of laminar flow.

Heating systems and Cooling systems

  • More connection variants for element Terminal unit.

Articles in HelpSystem:

RELEASE Rev. 12.2

Modules:

Base module Package manager

  • Improvement of Autosave function

  • Implemented cooling system module - availability depending on package

RELEASE Rev. 12.1

  • Update of product catalogues.

RELEASE Rev. 12.0

Modules:

Base module i Package manager

  • Improvement of AUTO mode.
  • Diagnostics of available graphics cards.

Radiators sizing

  • Display of radiator output for manually selected sizes through the Data table.

  • Improvement of readability of Manifold table.
  • Improvement of algorithm determining drop of temperature on the set of serially connected panels.

RELEASE Rev. 11.0

Modules:

Base module i Package manager'

  • Improved function Automatic walls, slabs and roofs.
  • Improved zoom scale and the preview scale.
  • Improved diagnostics concerning errors in the building structure.
  • Supplemented information presented in the result tables.
  • Integration of Paper format element with Printout pages element.

Radiant systems

  • Improved algorithm of heat output calculations of Heated by pipe feeds floor type connected virtually.
  • Improved algorithm which automatically inserts a heating/cooling floors into rooms with a hole in the slab.

Heating systems

  • Improved automatic connections of integrated radiators to distrubution pipes, depending on the configuration: valve shape (straight, angle) and connection direction (from the floor, from the wall).

Panel systems

  • Improved flow rates calculations for the serial-connected panels.

RELEASE Rev. 9.2

  • Update of product catalogues.

RELEASE Rev. 9.1

  • Update of product catalogues.

RELEASE Rev. 9.0

Modules:

Base module i Package manager

  • Added declare multi-wing doors and windows.
  • Added the appearance configuration of the Reference point.
  • AUTO mode has been extended of snap the vertices Opening in slab to elements from the DWG underlay.

  • Improved algorithm of insert Heating floor in multi-storey rooms (with Opening in slab).
  • Implemented automatic algorithm which cuts Heating wall lying in the area of windows / doors.

  • Added the possibility of defining Tolerance relative to thickness of graphical partition (wall, ceilings and roofs), that the Partition definitions will be assign.

  • Improved determination of the optimal refrigerating level (Δθ) for the serial-connected panels.
  • Maximum height position for the panels has been increased to 30 m.
  • Expanded information of the flow rate for panel hint and panel label.

RELEASE Rev. 8.0

Modules:

Base module i Package manager

  • Improved diagnostics for incomplete data when Generate walls and slabs from rooms and building contour algorithm has launched.
  • Room label - added the ability of display the Description field.
  • Added the possibilty of creating default room types (with their data and parameters).
  • Added configure the appearance of elements during their insertion operations.
  • Improved the ergonomy of filling graphic elements data.

  • Changed diagnostics from error to warning for Partition definitions with no thickness filled for Part. with specified U (Heat transfer coefficient).

RELEASE Rev. 7.3

  • Update of product catalogues.

RELEASE Rev. 7.2

Modules:

Base module i Package manager

  • New diagnostic messages for incorrect or incomplete building structure data have been introduced.
  • The rank of the message with zero thickness of the partition definition has been reduced to a warning or hint (when the definition has no default status).

  • "Zone of ceiling panels" tool has been improved and developed.

Articles in HelpSystem:

RELEASE Rev. 6.1

Modules:

Base module i Package manager

  • Added A0 and A1 formats to printout pages.
  • Improved AUTO and ORTO modes.

Radiators sizing

  • Added possibility to display in radiator’s label setting of valves insert.
  • Allowed defining in project options default distance of radiator from wall.
  • Improved graphical presentation of radiators mounting items (so-called consoles) on plan views.

  • Added possibility to choose criterion of supply temperature optimization in radiant systems with correction of the algorithm's operation.
  • Improved algorithm of automatic division Heating/Cooling Zones into Heating/Cooling Areas.
  • Improved algorithm of automatic drawings of radiant heating/cooling loops.

Articles in HelpSystem:

RELEASE Rev. 5.1

  • Update of product catalogues.

RELEASE Rev. 5.0

Modules:

Base module i Package manager

  • Added dimension lines.

  • Improved the algorithm of automatic division of heating/cooling floor zone.
  • Improved presentation of RHC loop drawing on 3D view.
  • Extended functionality of pipe feed route to automatically fill the entire width of the stip with pipe feeds.

Articles in HelpSystem:

RELEASE Rev. 4.0

Modules:

  • Improved the algorithm drawing the RHC loop.

  • Added ceiling panels zone - tool for automatic stacking of ceiling panels.

Articles in HelpSystem:

RELEASE Rev. 2.2

Modules:

Base module i Package manager

  • Added possibility to saved files read-only.
  • 3D view printout has been avaliable.

Articles in HelpSystem:

RELEASE Rev. 2.1

  • Update of product catalogues.

RELEASE Rev. 2.0

Initial scope of modules:

  • Base module i Package manager
  • Radiators sizing
  • Interface gbXML (BIM)

Initial state of information materials



Retrieved from "https://en.help.instalsoft.com/index.php?title=Release_notes_InstalSystem_5&oldid=27510"