How to change coordinates in the imported DWG underlay
| Product | InstalSystem 5 |
| Type of article | TIP&TRICK |
| Source for translation | 2026-03-19 |
Problem description
Sometimes, when importing an Underlay from a DWG file, it is necessary to change its coordinates. This article describes the method for performing such an action.
Solution
After performing the operation Import underlay (For more information, see: Import underlay files), the Underlay is placed on the drawing with the coordinates of the source file. The current coordinates can be changed using the ways detailed below.
Сhanging coordinates of the Reference point
- Insert Reference point;
- Change X coordinate and Y coordinate in the Data table window - this enables local coordinate changes to be made by altering the coordinate system in the project.
Unchecking the box "Original position"
- Uncheck the box Original position in the Data table window - this allows to freely move the imported Underlay on the drawing.
1. Original position. - Insert Reference point.
Attention! The methods listed allow local changes to coordinates in the project. When exporting without modifying coordinates, the original coordinates from the imported file are retained.
Changing coordinates for exporting
To export file (For more information, see: Export / print results and drawings) with personalized coordinates, change the values in the fields Coordinate shift.
