Sewage installations - Bypass ventilation

Product	InstalSystem 5
Type of article	FUNCTION AND TOOL
Source for translation	2023-06-21

Description

The article describes methods of implementation of various cases of bypass ventilation in sewage installations.

Location in the program

The type of the stack is indicated in the Data table.

1. Pipe-run types.

All necessary points should be specified.

Example of use

The program provides several schemes to perform such types of stacks. Schemes A-D are applicable to buildings from 3 to 5 floors (less or equal to 12m in height). Schema E - for the buildings with more than 5 floors (more than 12m in height)

• Schema A:
  • Direct parallel ventilation: vent stack is connected to the sewage stack at the bottom near the stack foot and at the top to the vent cowl;
  • Generate intermediate ventilation connections can be made or not depending on the project features.
    

    

    2. Schema A.

    
    
• Schema B:
  • Indirect parallel ventilation: vent stack is connected to the branches on each floor;
  • Air admittance valve is used like an Element on top of stack for both stacks (Sanitary drainage and Ventilation conduit).
    

    

    3. Schema B.

    
    
• Schema С:
  • Direct parallel ventilation: vent stack is connected to the sewage stack at the bottom near the stack foot and at the top to the vent cowl;
  • Generate intermediate ventilation connections are made;
  • Connection to the vent stack from each fixture on the first floor and from each sewage branch on the floors above.
    

    

    4. Schema C.

    
    
• Schema D:
  • Air admittance valve is used on the first floor;
  • Drainage ventilating pipe-run are connected to the sewage stack on the floors above.
    

    

    5. Schema D.

    
    
• Schema E:
  • Direct parallel ventilation: vent stack is connected to the sewage collector. The connection must be made at least 2 m from the base of the stack;
  • Generate intermediate ventilation connections should be made;
  • Fixtures on the first floor are connected to the additional stack;
  • The connection of the additional stack to the main stack is made by the means of a "vent loop".
    

    

    6. Schema E.