Drawing assistant

Product	InstalSystem 4 NetSystem 4
Type of article	Functionalities
Content up-to-date for version	IS 4.13 NS 4.7

Description

Drawing assistant is avaiable in the package InstalSystem 4 and NetSystem 4.
It supports system designing, enables drawing or inserting into the project elements at a predetermined distance and at a given angle in addition to an already existing element in the project: imported base, building construction or other. It also allows the imposition of a drawn length of the pipe-run or a section of the network.

Location in the program

Assistant drawing can be triggered by:

• F6 key
• toolbar View / Show/hide drawing assistant .
  

1. Selection drawing assistant from menu

Drawing assistant window will appear, which contains the following information:

• Δx, Δy - increase from the initial section of the network
• L - the current length of the led section
• Angle - the angle of intersection with the x axis
• Help lines - are visible when "Auto" is selected.

Example of use

Insert the network section of the specified length at Net-san

1. Turn off AUTO.
2. Select the right type of network and start drawing section in selected location.
3. To draw a section of example 5 m enter the desired length in Assistant drawing field "L [m]".
4. Finish drawing the section.

2. Drawing the section of predetermined length

Attention! To kept section length turn off AUTO.

Insert the section at a given angle to the existing network section at Net-san

1. Turn on AUTO.
2. Select the right type of network and start drawing section in the selected location.
3. To draw a section for example 90º enter the angle in the drawing assistant in the field "Angle of add. crossing help line [º]".
4. Using the appearing help lines deflected at a given angle, finish drawing the section.

3. Drawing the section at a given angle

Attention! To help lines were visible turn on AUTO.

Insert the section parallel to the wall of a building in Instal-therm

1. Turn on AUTO.
2. To draw a parallel section from the existing wall by a distance eg. 0.2 m enter the desired distance in the drawing assistant in the field "Dist. of add. parallel help line [m]".
3. Select the right type of the section before the beginning of drawing invade the cursor over the wall to which the sectiont is to be drawn parallel (without selecting).
4. Start drawing section in the desired location using the displayed help lines.
5. Finish drawing the section.

4. Drawing the section parallel to the wall with appropriate distance

Attention! To help lines were visible turn on AUTO.

Video - Drawing the section at a given angle and parallel