Preparation of building structure

Product	InstalSystem 5
Type of article	FUNCTIONALITY
Source for translation	IS 5.0 Beta 33

Description

The article describes how building structure can be prepared and how the created structure can be verified. There are several ways the building structure can be prepared for a project. The choice of the method depends on what source data on the structure and storey plans are available and on the scope of the design to be made. If the scope of the design does not include calculation of heat losses according to standards, then rooms can be represented in the plans as polygons with no cooling partitions. Each storey constitutes a separate plan drawing sheet.

Location in program

Storeys management

• Storeys management is available in the General data window.
  

  

  1. Storeys management

  
  

Import underlay

• Icons of components and functions related to importing underlays (base drawings) are available in the 2D Editor window on the Main tools bar in the Underlay section when the Underlay editing scope is enabled.
  

  

  2. Import underlay

  
  

Building structure

• Icons of components and functions related to the building structure are available in the 2D Editor window on the Main tools bar in the Construction section when the Construction editing scope is enabled.
  

  

  3. Building structure components

  
  

Obliczenia struktury budynku

• Computation of building structure dostępne są na pasku Main tools w sekcji Calculations.
  

  

  4. Computation of building structure

  
  

Examples of use

Manual creation of building structure

Storeys

1. Create the required storeys and append their data. The movie shows creation of two sets of storeys.
   
   
   

Underlay

Underlay (base drawing) is a two-dimensional (flat) graphical object retrieved from an external raster or vector file. The underlay itself does not provide building structure components, but it enables manual creation thereof adapted to the actual state of the building.
For more information, see: Import files

Room - manual creation of rooms

1. Create a Room manually using a contour line
   
   
   

or by drawing a diagonal line. When a room is created by drawing a diagonal line disable the ORTO operating mode. After drawing the diagonal line complete the edition by right clicking.

Room - identification within area bordered with drawn partitions

1. Place a series of Wall components by entering at the start the thickness of the wall in Data table and moving the cursor along the internal edges of the walls on the underlay. In underlays retrieved from a DWG file make use of the snapping to indicated layer feature. After placing Internal walls insert External walls in similar manner.
   
   
   
2. Place the following components: Window, Door, Opening in wall, Recess.
   
   
   
3. Place the following components: Slab. Outline of one storey is by default covered by a single slab.
   
   
   
4. Place the following components: Roof.
   
   
   
5. Wykonać Computation of building structure .

Computation of building structure uruchamiają szereg operacji związanych z dostarczeniem kompletnej struktury budynku:

• docinanie przegród płaszczyzną dachu,
• automatyczne rozpoznawanie pomieszczeń.

Ręczna edycja pomieszczeń i automatyczne rozpoznanie ścian i stropów na tle podkładu

Operacja automatycznego rozpoznania ścian i stropów pozwala na utworzenie tych przegród w przestrzeniach zidentyfikowanych pomiędzy pomieszczeniami znajdującymi się w projekcie, a zewnętrznym obrysem budynku.
By wykonać operację, należy:

1. W pliku projektu z uprzednio wstawionymi pomieszczeniami wykonać obrysowanie rzutu budynku z wykorzystaniem funkcji 'Obrys budynku'.
2. Opcjonalnie: zdefiniować w tabeli danych elementu obrys budynku wartości pól 'od kondygnacji' oraz 'do kondygnacji' jeśli obrys budynku jest powtarzalny dla kilku jego poziomów.
3. Wywołać interpretację ścian zewnętrznych i wewnętrznych oraz stropów na podstawie pomieszczeń i obrysu budynku za pomocą funkcji Automatic walls, slabs and roofs
   

   

   5.Automatic walls, slabs and roofs

   
   
   
   

Importing a complete building structure

Importing a building structure from a BIM (gbXML) compatible format

For more information, see: Import files

Importing a building structure from an InstalSystem 4 (ISB) project file

If necessary, manually correct or append the missing or incorrect components of the building structure thus obtained using the methods described above.

Verification of the correctness of building structure

Carry out the verification in the 3D view window

For more information, see: View navigation in the graphical editor