Drawing assistant
Revision as of 14:22, 25 April 2013 by X - MPs edytor (talk | contribs)
Access ability
- available in programs: Instal-therm, Instal-san and Net-san
- by the F6 button
Follow steps
- Display the drawing assistant.
- Set the angle/section length/distance from the parallel element.
- Choose the element to insert from the appropriate toolbar tab.
- Determine the position of the element due to help lines displayed in the workspace.
Description
Drawing assistant is function avaiable in programs: Instal-therm, Instal-san and Net-san.
It supports system designing, enables drawing or inserting into the project elements in a declared distance or angle in addition to an already existing element in the project. In case of drawing such elements as pipe-run or system section there’s also a possibility of setting its’ length.
How to use
Drawing assistant can by displayed by the F6 button or by by menu View / Show/hide drawing assistant
After calling:
- Set the angle/section length/distance from the parallel element.
- Choose the element to insert from the appropriate toolbar tab.
- Determine the position of the element due to help lines displayed in the workspace.
Target
- sekcja tworzona w oparciu o referencje do zastosowań
- screen
- film
- plik