@@ Line 1: / Line 1: @@
+<IS_HELP id="HS71"/>
+The article has been published on our website: [//instalsoft.com/support/publication-info/ Publication info].
+<!--
 {{Article table
 |commercial_product1=InstalSystem 5
-|p2                 =<!--gdy jest kolejny produkt handlowy, zamienić na->"produkt_handlowy2="-->
-|p3                 =<!--gdy jest kolejny produkt handlowy, zamienić na->"produkt_handlowy3="-->
-|p4                 =<!--gdy jest kolejny produkt handlowy, zamienić na->"produkt_handlowy3="-->
 |category1          =InstalSystem 5#PRODUCT INFORMATIONS
 |category_name1     =PRODUCT INFORMATION
-|c2                 =<!--Jest kategoria -> zamienić na: "category2=" i uzupełnić link do sekcji kategorii na stronie głównej produktu-->
+|version1           =2021-01-27
-|category_name2     =<!--podać nazwę kategorii "ZASTOSOWANIE"/"FUNKCJONALNOŚĆ"/...-->
-|c3                 =<!--if there is the second category, change to->"category3="-->
-|category_name3     =<!--fill up with category "SOFTWARE APPLICATION"/"FUNCTIONALITY"/...-->
-|version1           =[[Release notes InstalSystem 5#Version GOLD Rev. 11.0|GOLD Rev. 15.2]]
-|v2                 =<!--Jest wersja -> zamienić na: "version2=" i uzupełnić link do sekcji RN danego produktu-->
-|v3                 =<!--Jest wersja -> zamienić na: "version2=" i uzupełnić link do sekcji RN danego produktu-->
-|v4                 =<!--Jest wersja -> zamienić na: "version2=" i uzupełnić link do sekcji RN danego produktu-->
 }}
+-->
+<!--In the absence of changes, standard text is published: "Update of product catalogues."-->
+<!--===<span style="color: grey;">''RELEASE Rev. XX.Y (planned date of publication DD.MM.YYYY*)''</span>===-->
+<!--<span style="color: grey;">* The scheduled date of publication may change. It is presented for information purposes only. InstalSoft is not obliged to release the publication on this date''</span>-->
+<!--===<span style="color: grey;">''RELEASE Rev. 22.3 (planned date of publication 22.02.2022*)''</span>===
+<span style="color: grey;">* The scheduled date of publication may change. It is presented for information purposes only. InstalSoft is not obliged to release the publication on this date''</span>-->
+<!--===RELEASE Rev. 22.2===
+* Update of product catalogues.
+===RELEASE Rev. 22.1===
+* Update of product catalogues.
+====Articles in HelpSystem:====
+* [[Designing sewage installations]]
+* [[How to eliminate: "Incorrect building contour"]]
+* [[How to eliminate: "The pipe-run is part of the receiver connection"]]
+* [[Manifolds for radiant system and their accessories]] (actualized)-->
+<!--
+===RELEASE Rev. 22.0===
+'''<IS_TS id=PH_ISNS5_BASE/>'''
+* Mode ''<IS_TS id= ThemeKindDark/>'' and Mode ''<IS_TS id= ThemeKindLight/>'' - the ability to switch between two modes (''<IS_TS id= btUstawienia/>'' - ''<IS_TS id= btUstawieniaWygladEkranu/>'') for the ''<IS_TS id= StimulsoftFormViewerEditor/>'' application (watch the movie)
+* New element ''<IS_TS id= ScianaKurtynowa/>'' for the range ''<IS_TS id= lystrFloors/>'' - ''<IS_TS id= rpScianaKurtynowaDesc/>'' having thermal, visual and functional functions: (watch the video)
+** Ability to manually insert an item from the toolbar
+** Possibility to interpret the ifcCurtainWall element from IFC2x3 and IFC4 files to the native ''<IS_TS id= ScianaKurtynowa/>'' element
+** Ability to convert the ''<IS_TS id= iNameKonstrSciana/>'' element to the ''<IS_TS id= ScianaKurtynowa/>'' element (and vice versa) from the ''<IS_TS id= DataEditorTable/>'' window
+** Dedicated ''<IS_TS id= strpnDzialkaIDOpisu/>'': default ''<IS_TS id= WymiarGrubosc/>'', appearance for ''<IS_TS id= GraphicalEdit/>'', ''<IS_TS id= View3D/>''
+** Improved way of connecting elements ''<IS_TS id= iNameKonstrSciana/>'' with ''<IS_TS id= ScianaKurtynowa/>'' for correct visualization (transverse walls, structural columns)
+** IFC4 export of ''<IS_TS id= ScianaKurtynowa/>'' element to ifcCurtainWall
+* New function ''<IS_TS id= rpPrzytnijStrop/>'' in section ''<IS_TS id= rpStropOtworIkona/>'' - ''<IS_TS id= rpPrzytnijStropDesc/>'': (watch the movie)
+** The elements ''<IS_TS id= Slab/>'' and ''<IS_TS id= Roof/>'', which intersect each other are diagnosed and listed
+* Possibility to enable visualization of the area in the room defined by the ''<IS_TS id= strpnPodlGotowaPodloga/>'' and ''<IS_TS id= strpnPodlStropPodwieszany/>'' fields for ''<IS_TS id= View3D/>'': (watch the movie)
+** Possibility to define the degree of darkening of the area (''<IS_TS id= rsDanogi/>'' - ''<IS_TS id= strLblWygladCaption/>'' - ''<IS_TS id= iNameKonstrPomieszczenie/>'')
+* Expansion of the diagnostics of the operation ''<IS_TS id= PartitionsGenerator/>'' - incorrectly defined areas of the ''<IS_TS id= iNameKonstrPomieszczenie/>'' and ''<IS_TS id= ObrysBud/>'' elements are diagnosed and listed
+* Snap mode (''<IS_TS id= strAUTOModeName/>'') for ''<IS_TS id= iNameKonstrPomieszczenie/>'' and ''<IS_TS id= ObrysBud/>'' in view mode ''<IS_TS id= StoreyShadowAbove/>'' / ''<IS_TS id= StoreyShadowBelow/>'' for the same objects in ''<IS_TS id= GraphicalEdit/>''
+* The condition of having to completely cover (with its entire area) the vertical walls with the ''<IS_TS id= StrAccess.Roof/>'' element has been loosened (the solid tightness condition must be maintained in order to generate the ''<IS_TS id= rpPomieszczenieAutomatyczne/>'' element)
+* The function ''<IS_TS id= CorrectWallConnections/>'' in the ''<IS_TS id= CorrectWallGeometry/>'' window corrects the intersecting walls indicated in the ''<IS_TS id= ErrorModuleTitle/>'' window (e.g. from structure interpretation from IFC files) (watch the movie)
+* New option ''Riser determines direction of schematic view''. For the selected option, the laying direction of branches on the schematic view takes into account the viewpoint indicator (the front of the element) of the ''<IS_TS id= iNamePion/>''. Program locates the branches departing from the ''<IS_TS id= iNamePion/>'' on the appropriate side of the ''<IS_TS id= iNamePion/>''. Control of the option is available in the ''<IS_TS id= DataEditorTable/>'' for the item ''<IS_TS id= SchematicStartPointNameSingle/>''
+* Possibility to generate schematic views of installations with virtual connections to heating and cooling zones
+* Improved operation of ''<IS_TS id= GenerateSchematicCaption/>'' algorithm
+* Correct connection of the pipe-runs to vertical pipe-runs within one storey without the need to use the ''<IS_TS id= iNamePion/>''
+* Ability to impose dimensions in ''<IS_TS id= DataEditorTable/>'' for ''<IS_TS id= iNameRectangle/>'' and ''<IS_TS id= iNameEllipse/>'' elements
+* The new window ''<IS_TS id= PrintoutPagesLayers/>'' allows to control the scope of elements exported to DWG / DXF formats, generally at the level of entire editing ranges, and more specifically at the level of individual elements
+* The new ''<IS_TS id= LayerPrefix/>'' option allows to give an individual prefix to layers created by InstalSystem 5 and exported to DWG format
+* Possibility to choose the option ''<IS_TS id= LabelsExportMethodExportAsBlocks/>'' or ''<IS_TS id= LabelsExportMethodBasicExport/>'' for drawings exported to DWG / DXF format
+* The exported drawings to the dwg / dxf formats contain all the graphics. Elements such as ''<IS_TS id= rpTablkaProjektuLogo/>'', ''<IS_TS id= RysunekPrzekrojuKonstrukcji/>'', ''<IS_TS id= iNameTabelkaRozdzielacza/>'', ''<IS_TS id= iNameTabelkaMieszacza/> are currently not exported to separate files when exporting
+'''<IS_TS id=rpInterpretacjaIFC/>'''
+* Support for import and interpretation of ''<IS_TS id= ScianaKurtynowa/>'' element (see more ''<IS_TS id= PH_ISNS5_BASE/>'') (watch the movie)
+* Optimizing the interpretation of IFC elements to native ''<IS_TS id= InstalSoftCaption/>'' elements:
+** Improved interpretation (''<IS_TS id= rpCreateWallsFromIfc/>'' function)
+** Improved interpretation (''<IS_TS id= rpCreateRoofsFromIfc/>'' function)
+** Support for interpretation (''<IS_TS id= rpCreateWindowsDoorsOpeningsFromIfc/>'' function) of the ''<IS_TS id= pinNameOknoDachowe/>'' element
+** Diagnostics of ifcWall diamond-shaped interpretation, the ''<IS_TS id= ErrorModuleTitle/>'' window indicates elements that have not been interpreted
+'''<IS_TS id=rpExportIFCkonstrukcja/>''' / '''<IS_TS id=rpEksportIFC_HC/>''' / '''<IS_TS id=rprpEksportIFC_T/>'''
+* Support for exporting the ''<IS_TS id= ScianaKurtynowa/>'' element (see more ''<IS_TS id= PH_ISNS5_BASE/>'') (watch the movie)
+* Parameterization of the IFC4 export of pipe-run(s) from the scope ''<IS_TS id= InstalacjeGrzewcze/>'', ''<IS_TS id= InstalacjeChlodnicze/>'', ''<IS_TS id= InstalacjeWodociagowe/>''. The ''<IS_TS id= iNameDzialka/>'' element is exported together with:
+** Technical parameters
+** ''<IS_TS id= rsKodKatalogowyMaterialu/>'' element
+** Calculation parameters
+* Added the filtering condition for the export of elements to IFC4 in the ''<IS_TS id= rpExportPlikuIFC/>'' - ''<IS_TS id= PrintoutPagesLayers/>'' window:
+** Automatic selection / deselection of elements that are common to another scope of the project
+** Depending on the configuration of the license for precise control of the actually exported items
+* Optimization of the result files for the selected ''<IS_TS id= strChbIfcExportLabels/>'' function
+'''<IS_TS id=PH_IS5_H/>'''
+* ''<IS_TS id= etstrTypDzialki/>'' may be added to the results in the label of the ''<IS_TS id= iNameDzialka/>'', as in the ''<IS_TS id= PH_IS5_T/>'' module
+* ''<IS_TS id= strOdlegloscOdPodlogi/>'' or ''<IS_TS id= strRzednaLong/>'' may be added to the labels of the following elements: ''<IS_TS id= iNameRozdzielaczPure/>'', ''<IS_TS id= rpMieszacz/>'', ''<IS_TS id= iNameCOElementONarzOporze/>'', ''<IS_TS id= iNameCOGrzejnik/>'', ''<IS_TS id= iNameNaczWzb/>'', ''<IS_TS id= iNameCOSprzegloHydr/>'', ''<IS_TS id= iNameCOZrodlo/>'', ''<IS_TS id= iNameCOWezelRegulacyjny/>'', ''<IS_TS id= StacjaMieszkaniowa/>''
+* Element ''<IS_TS id= iNameCOZbiornikBuforowySystemowMieszkaniowychWezlowCWU/>'', connected in a similar way as a ''<IS_TS id= iNameCOSprzegloHydr/>''
+* In the data sheet of ''<IS_TS id= iNameCOGrzejnik/>'', the field ''<IS_TS id= KotwicaGrzejnika/>'' has been added, allowing to select a point that does not change position after sizing
+* New division in ''<IS_TS id =sZestawienieGrzejnikow/>'', taking into account the side of the radiator connection (connection - right/left/other)
+'''<IS_TS id=PH_IS5_HL/>'''
+* New type of partition ''<IS_TS id= rsTypKonstrukcjiPrzegrodyScianaKurtynowa/>'' (see more <IS_TS id= PH_ISNS5_BASE/>) (watch the movie)
+* Improvements by ''<IS_TS id= rsObliczeniowyTypKPrzegrodyObliczana/>'': (watch the video)
+** Possibility to sort building materials in the area of columns by their properties
+** Improvement of the building materials search engine and moving it to the bottom of the window
+* Define in (''<IS_TS id= rsDanogi/>'' - ''<IS_TS id= Danog_BudynekSC/>'') the field ''<IS_TS id= MinimalnaPowierzchniaUwzglednianejPrzegrody/>'': (watch the video)
+** ''<IS_TS id= ErrorModuleTitle/>'' of partitions (in the rank of ''<IS_TS id= cHintStringPlural/>''), which were automatically unchecked for the field ''<IS_TS id= UwzgledniajWObliczeniach/>''
+** New ''<IS_TS id= strpnDzialkaIDOpisu/>'' for partitions not included in calculations for ''<IS_TS id= GraphicalEdit/> and <IS_TS id= View3D/>'' (range ''<IS_TS id= ScopeOZC_T_Short/>'')
+* Possibility of sorting thermal partitions in the area of columns by their properties (e.g. ''<IS_TS id= sAz/>'', ''<IS_TS id= strs_expidISFPrzegrodaU0/>'', ''<IS_TS id= strs_expidISFPomieszczenieStrataCieplaPrzenikanie/>''), which participate in determining the load for the ''<IS_TS id= iNameKonstrPomieszczenie/>'' element in the ''<IS_TS id= OZCModuleName/>'' window (watch the movie)
+* Improvement of the algorithm that automatically creates thermal partitions from structural elements (especially the ''<IS_TS id= StrAccess.Roof/> ''/ ''<IS_TS id= StrAccess.Slab/>'' element in relation to vertical walls, the thermal model of arch walls has improved)
-==Information about changes==
+'''<IS_TS id=PH_IS5_RL/>'''
-<!--In the absence of changes, standard text is published: "There were no significant functional changes in this release."-->
+* Improvements of ''<IS_TS id= ShowInteractiveCalculationWindow/> window'' (watch video):
-<!--===<span style="color: grey;">''RELEASE Rev. XX.Y (planned)''</span>===-->
+** Prompt results recalculation after deltaT (temperature drop in a loop) modification
+** Presentation of manifolds in the tree in the left part of the window
+** Presentation of settings on manifolds (on valves/flowmeters)
+** Presentation of coverings
+* Ability to configure the contents of the ''<IS_TS id= iNameTabelkaRozdzielacza/>'' element, by selecting or deselecting items in the lists in it's data table
+* Possibility to search for ''<IS_TS id= PowGrzewczoChlodzaca/>'' or ''<IS_TS id= strSPGCh/>'' elements by the value of the ''Type'' field, e.g. ''<IS_TS id= strTypPGSlepaBezRur/>''
-===<span style="color: grey;">''RELEASE Rev. 15.2 (planned)''</span>===
+'''<IS_TS id=PH_IS5_T/>'''
-* There were no significant functional changes in this release.
+* Element ''<IS_TS id= zaworPierwszenstwa/>''
+* ''<IS_TS id= strOdlegloscOdPodlogi/>'' or ''<IS_TS id= gridcolRzedna/>'' can be added to the labels of the following elements: ''<IS_TS id= iNameRozdzielaczPure/>'', ''<IS_TS id= iNameNaczWzb/>'', <IS_TS id= iNameSanZrodlo/>'', ''<IS_TS id= iNameSanPodgrzewacz/>'', ''<IS_TS id= StacjaMieszkaniowa/>'', ''<IS_TS id= iNameDEA/>'', ''<IS_TS id= ZaworMieszajacy/>''
+'''<IS_TS id=PH_IS5_S/>'''
+* Publication of the first version of the commercial module ''<IS_TS id= PH_IS5_S/>'', covering the design of gravity sewage systems for domestic use. This version allows you to design installations with direct stack ventilation and ventilation manifolds. Bypass ventilation is scheduled to be introduced in future publications as a free update. Also, the next publications will introduce full control over the configuration of the pipe-run nodes, i.e. where they are connected (watch the video)-->
+<!--
+===RELEASE Rev. 21.3===
+* Update of product catalogues.
+===RELEASE Rev. 21.2===
+* Update of product catalogues.
+===RELEASE Rev. 21.1===
+* Update of product catalogues.
+===RELEASE Rev. 21.0===
+{{#ev:youtube|rq_FwByjFtk|300|left|}}<br clear="all"/>
+'''<IS_TS id=PH_ISNS5_BASE/>'''
+* Ability to limit the range of visible stories in the 3D view to those with selected elements
+* Quick switch between visible stories in the 3D view
+* Distance measurement in a 3D view (for the result to be correct, set the view to one of the perpendicular to the planes of the coordinate system)
+* Ability to set the background style in the 3D view (''<IS_TS id=btUstawienia/>'' - ''<IS_TS id=btUstawieniaWygladEkranu/>'')
+* Improvements to the ''<IS_TS id=Lukarna/>'' element by:
+** possibility of replacing the walls of the ''<IS_TS id=Lukarna/>'' element with the walls of the building in order to properly model its subpartitions
+** blocking the possibility of moving the walls of the ''<IS_TS id=Lukarna/>'' element automatically generated
+** improvement of the visualization of the walls of the ''<IS_TS id=Lukarna/>'' element in the ''<IS_TS id=GraphicalEdit/>'' window, which makes it easier to change their thickness
+* Improvements to the '' <IS_TS id=PartitionsGenerator/> function '' by:
+** reduction of the amount of walls with similar thickness generated in a series
+** improvement of wall generation and connections between them
+** generation of single-story walls for a multi-story ''<IS_TS id=ObrysBud/>'' element, which facilitates copying repeatable stories
+* Improvements in manual division of the structural wall in the horizontal and vertical arrangement within a given storey, which allows for an analogous division of thermal partitions
+* Improvement of the drawing and joining functions ''<IS_TS id=iNameDzialka/>'', ''<IS_TS id=iName2Dzialki/> ''
+* Improvement of the ''<IS_TS id=btCheckFlow/>'' function
+* The ''<IS_TS id = GenerateSchematicCaption />'' function works separately for the project scopes: ''<IS_TS id=InstalacjeGrzewczeIChlodnicze/>'' and ''<IS_TS id=InstalacjeWodociagowe/>''
+* Distinction of the ''<IS_TS id=GenerateSchematicWorksheet' />'' icon on the ribbon for project scopes: ''<IS_TS id=InstalacjeGrzewczeIChlodnicze/>'' and ''<IS_TS id=InstalacjeWodociagowe/>''
+* Easier access to ''<IS_TS id = iNameHyperlinkRozw />'' worksheets by separating a separate branch for worksheets with schematic views into project scopes: ''<IS_TS id=InstalacjeGrzewczeIChlodnicze/>'' and ''<IS_TS id=InstalacjeWodociagowe/> ''
+* Improved operation of ''<IS_TS id=GenerateSchematicCaption/>'' algorithm for variants available for the ''<IS_TS id=SchematicStartPointNameSingle/>'' element in the ''<IS_TS id=ElementyPrezentowaneNaRozw/> field''
+* Improving program performance by speeding up the ''<IS_TS id=GenerateSchematicCaption />'' operation
+* Updating product catalogs
+'''<IS_TS id =rpPodkladyIFC/>'''
+* New edit scope visibility mode named: ''<IS_TS id=stringZakresEdycjiVisibleOnlyEdges/>''. Displays the edges on the IFC model, facilitating further analysis when interpreting IFC objects into structural elements further used to create a thermal model
+* Ability to display the object ''ifcSpace'' in the ''<IS_TS id=GraphicalEdit/>'' and ''<IS_TS id=View3D />'' windows, which facilitates the analysis of the IFC model and the outline of rooms
+* New search criteria in the ''<IS_TS id=FindTitle/>'' window for the ''<IS_TS id=lystrGraphicBackground/>'' edit scope: ''ifcSpace'', ''ifcPlate'', ''ifcMember''
+'''<IS_TS id =rpInterpretacjaIFC/>'''
+* Improvements in the operation of the ''<IS_TS id=rpCreateStoreysFromIfcS/>'' function, in the case of a storey limited by sloping roofs
+'''IFC (BIM) building structure elements export'''
+* New module that allows you to export the building structure designed in InstalSystem 5 to an IFC4 file (as Reference View)
+(more information on the Reference view: https://standards.buildingsmart.org/MVD/RELEASE/IFC4/ADD2_TC1/RV1_2/HTML/schema/views/reference-view/index.htm)
+* The function of exporting structure elements is available in the ''<IS_TS id=lystrPrintPreview/>'' scope
+* The elements are classified according to the IFC4 standard: https://standards.buildingsmart.org/MVD/RELEASE/IFC4/ADD2_TC1/RV1_2/HTML/
+'''IFC (BIM) building structure elements export''' / '''<IS_TS id=rpEksportIFC_HC/>''' / '''<IS_TS id=rprpEksportIFC_T/>'''
+* New, dedicated ''<IS_TS id=rpExportPlikuIFC/>'' window allows for:
+** include or exclude element labels from export
+** precise determination of the scope of exported elements
+** determination of basic data about the exported IFC model (s)
+** selection of worksheets to be exported and determination of the number of the resulting IFC files
+* IFC models can be exported in an iterative way according to the BIM process
+* File conversion is not required to obtain the IFC model (component data may not be complete)
+'''<IS_TS id=PH_IS5_H/>''' / '''<IS_TS id=PH_IS5_C/>'''
+* New thermostatic connection sets for bathroom and decorative radiators
+* New ''<IS_TS id=ZakonczenieDzialkiBPM/>'' element enabling modeling of venting and drain pipe-runs ending with a free outlet
+* 3D visualization of connection type variants for the ''<IS_TS id=iNameCOElementONarzOporze/>'' element when declaring data in the ''<IS_TS id=DataEditorTable/>'' window
+'''<IS_TS id=PH_IS5_HL/>'''
+* New type of partition: ''<IS_TS id=rsTypKonstrukcjiPrzegrodyScianaDylatacyjna/>''
+* The ''<IS_TS id=rsPomieszczenie/>'' element along with its label is also visible on the ''<IS_TS id=ScopeOZC_T_Short/>'' scope
+'''<IS_TS id=PH_IS5_RL/>'''
+* New type ''<IS_TS id=vltpgZOgrTempPowr/>'' of the ''<IS_TS id=iNameOPStrefaPodlogGrzejnych/>'' element, must be supplied from the high-temperature part by pipe-runs and is not divided automatically
+* The value of the default floor thermal conductivity coefficient in the heating floor structure window is 2.1 W / mK, and the default floor thickness is taken from the floor data
+'''<IS_TS id=PH_IS5_T/>'''
+* The possibility of using manifolds in the hot water circulation network
+* New ''<IS_TS id=ZakonczenieDzialkiBPM/>'' element enabling modeling of venting and drain pipe-runs ending with a free outlet
+* The ''<IS_TS id=iNameSanZrodlo/>'' element has additional text data ''<IS_TS id =sPrzeznaczenieCzynnika/> '' (e.g. drinking water, process water). After calculations, this information is available in the labels of fed elements (it does not affect the calculations)
+* In the ''<IS_TS id=FindTitle/>'' window it is possible to define the search criteria: ''<IS_TS id=strpnOdbPunktCzerpalny/>'' located on a specific type of element ''<IS_TS id=iNameSanZrodloSciekow/>''
+* New ''<IS_TS id=SeparatedSchematics/>'' option in the ''<IS_TS id=DataEditorTable/>'' window for the ''<IS_TS id=rpCreateSchematicStartPointW/>'' element, giving the possibility to create separate ''<IS_TS id=iNameCOHyperlinkRozw/>'' worksheets for cold water installation and for domestic hot water and circulation
+*Presentation of ''<IS_TS id= iNameDEA/>'' and ''<IS_TS id =ZaworMieszajacy/>'' elements on ''<IS_TS id=iNameHyperlinkRozw />'' worksheets
+====Articles in HelpSystem:====
+* [[Convective heating installation with risers]]
+* [[Ground modeling]]
+* [[Improvements of creating and managing Building units]]-->
+<!--
+===RELEASE Rev. 20.2===
+* Update of product catalogues.
+===RELEASE Rev. 20.1===
+* Update of product catalogues.
+===RELEASE Rev. 20.0===
+{{#ev:youtube|QAOdHlV_S3s|300|left|}}<br clear="all"/>
+'''IFC (BIM) import basis'''
+* A new module that allows to import a building model (including installations and equipment) from IFC files (watch video)
+** Import of IFC files as an independent model (available on ''<IS_TS id=lystrGraphicBackground/>'' scope)
+** Loading the IFC model into any project (new and with the existing, e.g. building structure or installation), including removing and replacing the existing model (re-import)
+** Loading many independent models into one project
+** Possibility of precise model management, incl. preview of the full structure of the IFC file, preview of the properties of each element, hiding and searching for elements using the '' <IS_TS id = ProjectBrowser /> '' window
+** Loading of IFC models containing both architecture and designed installations previously  exported from InstalSystem 5 and from other programs
+** Model visible as in the '' <IS_TS id = GraphicalEdit /> '' window (drawing as edges) as in the  '' <IS_TS id = View3D /> '' window (actual model)
+** Snap-in  of construction elements and installations drawn on a 2D view to IFC objects
+** IFC models export to DXF / DWG (2D), PDF (2D / 3D) formats
+'''IFC (BIM) building data interpretation'''
+* A new module that allows the interpretation of structural objects from the IFC file into InstalSystem 5 structural partitions (further used, among others, for thermal calculations of the building) (watch video)
+** Independent interpretation of selected stories based on the IFC file to obtain worksheets
+** Interpretation of selected construction elements (ifcBeam, ifcBuildingElementProxy, ifcColumn, ifcCurtainWall, ifcDoor, ifcFooting, ifcOpeningElement, ifcRoof, ifcSlab, ifcWall, ifcWindow and others) to InstalSystem 5 construction elements (''<IS_TS id=iNameKonstrSciana/>'' (with the element ''<IS_TS id = pinNameOtworWScianie />''), ''<IS_TS id = pinNameOkno />'', ''<IS_TS id = pinNameDrzwi />'', ''<IS_TS id = Roof />'', ''<IS_TS id = Slab />'' (with the element ''<IS_TS id = rpOtworWstropie />'')) and used, among others, by the ''<IS_TS id = PH_IS5_HL/>'' module
+** Possibility to modify or remove interpreted elements of the building structure<br/>
+'''IFC (BIM) heating/cooling system export''' / '''IFC (BIM) tap water system export'''
+* New modules enabling the export to an IFC4 file of heating and water installations designed in InstalSystem 5 (as Reference View) (watch video)
+** More information: https://standards.buildingsmart.org/MVD/RELEASE/IFC4/ADD2_TC1/RV1_2/HTML/schema/views/reference-view/index.htm
+** The installation export function is available on the scope '' <IS_TS id = lystrPrintPreview /> ''
+** Compliance of the classification of elements with the IFC4 standard: https://standards.buildingsmart.org/MVD/RELEASE/IFC4/ADD2_TC1/RV1_2/HTML/
+** Controlling the export of labels assigned to items in the window '' <IS_TS id = strBtnUstawieniaCaption /> '' -> '' <IS_TS id = OtherSettings /> '' -> '' <IS_TS id = strChbIfcExportLabels /> '' (the default is this option is unchecked)
+** Compatibility of coordinates of the exported IFC file from InstalSystem 5 program with the loaded IFC model within the ''<IS_TS id=rpPodkladyIFC/>'' module
+'''<IS_TS id=PH_ISNS5_BASE/>'''
+* New graphic elements: ''<IS_TS id=iNamePolygon/>'', ''<IS_TS id=iNamePolyline/>'', ''<IS_TS id=iNameRectangle/>'', <IS_TS id=iNameEllipse/>''
+* A throbber  (Spinning wheel) for  ''<IS_TS id=btCheckFlow/>'' function
+* New function '' <IS_TS id = rpMoveUnderlay /> '' enabling precise shifting of the underlay (by the indicated vector)
+* New marker (a dot) that distinguishes active ''<IS_TS id=rsWindow/>'' (watch video)
+* Abort calculations button (watch video)
+* Improvement of program performance by:
+** Speed up of work on big underlays in DWG/DXF format
+** Speed up of graphics operations
+** Speed up of ZOOM/PAN/ROTATE operations in the ''<IS_TS id=View3D/>'' window
+** Speed up of the ''<IS_TS id=iNameDzialka/>'' elements insertion
+** Speed up of data refresh operations in a ''<IS_TS id=rsDanogi/>'' window
+* Ability to control automatically created building units: '' <IS_TS id=strCreateJBOnEachStoreyFalse/>'' / ''<IS_TS id = strCreateJBOnEachStoreyTrue/> ''
+* Possibility to create building units from the window '' <IS_TS id=GraphicalEdit/> '' by selecting rooms and entering a common name for them in the field '' <IS_TS id = iNameJednostkaBudynku/> ''
+* Sorting the list of rooms in the window '' <IS_TS id=ProjectBrowser/> '' by the symbol of the room (the function is available under the right mouse button on the '' <IS_TS id=iNameJednostkaBudynku/> '')
+* New function '' <IS_TS id=rpCreateGround/> '' enabling modeling and graphical visualization of ground surfaces of various shapes (in the form of a building envelope as a curve at the contact of the ground with external walls) (watch video)
+* Improvements of the '' <IS_TS id=Lukarna/> '' by:
+** improvement of automatically generated dormers on the  '' <IS_TS id = lystrFloors />'' scope
+** correct generation of the internal wall if the element '' <IS_TS id=Lukarna/> '' covers two or more rooms
+* Rearrangement and improvement of the assignment of elements to layers after exporting a drawing to DWG / DXF formats
+* Update of product catalogues.
+'''<IS_TS id=PH_IS5_H/>'''/ '''<IS_TS id=PH_IS5_C/>'''
+* New element: ''<IS_TS id=iNameCOSprzegloHydr/>' with size selected from the catalogue or automatically sized depending of flow rate  (watch video)
+* New element: ''<IS_TS id=iNameNaczWzb/>'' with size selected manually from the catalogue  (watch video)
+* New graphic elements (not calculated): ''<IS_TS id=pinNameManometr/>'' and ''<IS_TS id=pinNameTermometr/>'', straight and angular, possible to insert into the pipe-runs on the plan or in the 3D model (watch video)
+* A default ''<IS_TS id=pinNameZaworZwrotny/>'' can be set in ''<IS_TS id=rsDanogi/>'' window
+* Possibility to present the values of ''<IS_TS id=UzyskanaMocOgrzewania/>'' and ''<IS_TS id=UzyskanaMocChlodzenia/>'' in ''<IS_TS id=rsPomieszczenie/>'' label. Other values re-arranged and renamed.
+* Corrected and completed content of tables ''<IS_TS id=iNameTabelkaRozdzielacza/>'' and ''<IS_TS id=OPGeneralResultsHeatingTitle/>'', in cases when a ''<IS_TS id=iNameCOGrzejnik/>'' is supplied  from the same manifold as ''<IS_TS id=strOgrzewaniePlaszczyznoweLong/>''.
+*  New options in the ''<IS_TS id=strpnOrientation/>'' field in ''<IS_TS id=DataEditorTable/>'' for ''<IS_TS id=iNameCOReduktorTemp/>''/''<IS_TS id=rpWezel/>'' (watch video)
+*  Possibility to change the position of the front of the ''<IS_TS id=iNameCOElementONarzOporze/>'' element, which affects the result of the ''<IS_TS id=GenerateSchematicCaption/>'' function (watch video)
+* New presentation for the segments of pipe-runs coming out of the ''<IS_TS id=iNameRozdzielaczPure/>'' on the ''<IS_TS id=iNameHyperlinkRozw/>'' sheet - graphical offset of the supply and return pipe-runs.
+* 3D visualisation of: ''<IS_TS id=iNameRozdzielaczPure/>'', ''<IS_TS id=iNameCOReduktorTemp/>'', ''<IS_TS id=iNameCOWezelRegulacyjny/>'' elements orientation, during data declaration in ''<IS_TS id=DataEditorTable/>'' window (watch video)
+* Possibility to exclude selected rooms or receivers from the cooling function in heating/cooling installations (watch video)
+'''<IS_TS id=PH_IS5_DOG/>'''
+* Integrated universal (with right or left side connection) radiators - possibility to choose an universal radiators both as a ''<IS_TS id=DomyslnyTypGrzejZasLewo/>'' as well as as ''<IS_TS id=DomyslnyTypGrzejZasPrawo/>''
+* Change of diagnostics message: ''<IS_TS id=strerrOdbiornikNiekompatybilnySystemPodl/>'' priority from  ''<IS_TS id=rsDlgCptWarning/>'' to ''<IS_TS id=cErrorString/>'', allowing for a faster response to the incompatible choice of system for ''<IS_TS id=DomslnySysPodGrzejZasPrawejLewejSrodka/>'' in relation to the choice of ''<IS_TS id=strDomyslnyTypRurIIzolacji/>'' for ''<IS_TS id=UmiejscowieniePodejscieGalazka/> '' in <IS_TS id=rsDanogi/>'' window (watch video)
+'''<IS_TS id=PH_IS5_HL/>'''
+* Constant, independent of the calculation options, visibility of values in the project data: ''<IS_TS id=strs_expidISFOZCDaneOgolneEN_PojemnoscCieplna/>'' for the building and ''<IS_TS id=strs_expidISFKonstrukcjaPrzegrodyEN_PojCieplnaNaMetrDo2PrzegWewSrednia/>'' for a  ''<IS_TS id=sISFKonstrukcjaPrzegrody/>''
+* Calculations according to ''<IS_TS id=rsSC_EN_12831_ONORM/>'' standard have all result tables according to this standard
+* The ability to select a preset for ''<IS_TS id=strs_expidISFPomieszczenieEN_WysokosciowaKorektaQStrat/>'' in  ''<IS_TS id=DataEditorTable/>'' window of ''<IS_TS id=rsPomieszczenie/>'', which are higher than 5m.
+* Optimization of the ''<IS_TS id = ObliczeniaCieplneBudynku/>'' algorithm, what may reduce time of the calculations
+* Improvements to the ''<IS_TS id = Lukarna/>''  by:
+** correct determination of the room cubic capacity if the element '' <IS_TS id = Lukarna/> '' covers two or more rooms
+** improvement of the determination of thermal partitions in the '' <IS_TS id = ScopeOZC_T_Short /> '' scope for various design situations including dormers
+* Improvement of the algorithm that automatically creates thermal partitions from structural elements
+* Automatic division of thermal partitions into '' <IS_TS id = rsTypKon structurePartitionScianaZewnetrzna /> '' or '' <IS_TS id = rsTypKon KonstrukcjiPrzegrodyScianaPrzyGruncie /> '' taking into account the course of the ground curve (new element '' <IS_TS id = rpCreate /> '')
+'''<IS_TS id=PH_IS5_T/>'''
+* New element: ''<IS_TS id=iNameNaczWzb/>'' with size selected manually from the catalogue  (watch video)
+* New graphic elements (not calculated): ''<IS_TS id=pinNameManometr/>>'' and ''<IS_TS id=pinNameTermometr/>'', straight and angular, possible to insert into the pipe-runs on the plan or in the 3D model  (watch video)
+* Improvement of algorithm generating automatically schematic views
+* Change of diagnostics message: ''<IS_TS id=strerrOdbiornikNiekompatybilnySystemPodl/>'' priority from  ''<IS_TS id=rsDlgCptWarning/>'' to ''<IS_TS id=cErrorString/>'', allowing for a faster response to the incompatible choice of system for ''<IS_TS id=systemPodlaczenPunktowCzerpalnych/>'' in relation to the choice of ''<IS_TS id=strDomyslnyTypRurIIzolacji/>'' for ''<IS_TS id=UmiejscowieniePodejscieGalazka/> '' in ''<IS_TS id=rsDanogi/>'' window (watch video)
+===RELEASE Rev. 19.6===
+'''<IS_TS id=PH_ISNS5_BASE/>'''
+* Update of product catalogues.
+===RELEASE Rev. 19.5===
+'''<IS_TS id=PH_ISNS5_BASE/>'''
+* Update of product catalogues.
+===RELEASE Rev. 19.4===
+'''<IS_TS id=PH_ISNS5_BASE/>'''
+* Update of product catalogues.
+===RELEASE Rev. 19.3===
+'''<IS_TS id=PH_ISNS5_BASE/>'''
+* Update of product catalogues.
+===RELEASE Rev. 19.2===
+'''<IS_TS id=PH_ISNS5_BASE/>'''
+* Correction of critical errors which blocked the ''<IS_TS id=GenerateSchematicCaption/>'' function.
+* Update of product catalogues.
+===RELEASE Rev. 19.1===
+'''<IS_TS id=PH_ISNS5_BASE/>'''
+* Possibility to update InstalSystem 5 without requiring the administrator rights.
+* Update of product catalogues.
+===RELEASE Rev. 19.0===
+{{#ev:youtube|cTZu1tKyk40 |300|left|}}<br clear="all"/>
+'''<IS_TS id=PH_ISNS5_BASE/>'''
+* Improvements in the program performance:<br clear="all"/>- Faster response to group selection of the elements <br clear="all"/>- Smoother work with ''<IS_TS id = View3D /> '' window <br clear="all"/>- Acceleration of : ''<IS_TS id = PartitionsGenerator/>'' and ''<IS_TS id = CorrectWallGeometry/>'' functions  <br clear="all"/>
+* If a high-performance graphics card (not integrated with the motherboard or with the processor) is detected in the hardware configuration, it is set as active for the InstalSystem 5 program. This eliminates problems with the stability and performance of the application resulting from the lower performance of the integrated graphics card
+* PDF files exported by the program now have a vector structure, which allowed to significantly reduce their size
+* The front side of some elements is marked when selecting the element in the plan view - helps to obtain correct ''<IS_TS id = iNameHyperlinkRozw />''
+* Automatic generation of flat roofs (watch the video)
+* Support for creating a building structure and designing installations in buildings with multiple series of storeys (with mutually shifted floor levels) by: (watch the video)<br clear="all"/>- Possibility to display the ''<IS_TS id=ObrysBud/>'' element on another series of storeys (new field ''<IS_TS id=PokazujNaInnychCiagach/>''). This allows for the correct generation of structural partitions (walls and ceilings) after calling the ''<IS_TS id=PartitionsGenerator/>'' function<br clear="all"/>- Possibility of dividing the ''<IS_TS id=Slab/>'' element and quick convertion into the ''<IS_TS id=Roof/>''<br clear="all"/>- Possibility to combine parts of the installation on different series of storeys using the ''<IS_TS id=iNamePion/>'' element (with the ''<IS_TS id=PokazujNaInnychCiagach/>'' option and the option to hide the ''<IS_TS id=iNamePion/>'' element in the printout)<br clear="all"/>- Printout on one sheet two storeys, using the ''<IS_TS id=PrintoutPages_AdditionalStoreyCaption/>'' field available for the ''<IS_TS id=PrintoutPages_ElementName/>'' element
+* ''<IS_TS id=pinNameOtworWScianie/>'' element has been given a new option of connecting rooms by ''<IS_TS id=OpeningConnectsRooms/>'' checkbox, available in ''<IS_TS id=DataEditorTable/>'' window (watch the video)
+* Extended descriptions of the functions on the ribbon for the ''<IS_TS id=lystrFloors/>'' edit scope (watch the video)
+* Presentation of product catalog codes at the stage of editing general data and data of elements (watch the video)
+* Standard logo of the manufacturer distributing the given corporate version of the InstalSystem 5 package presented in tabular printouts can be replaced with the user's logo, e.g. of a design office (watch the video)
+* ''<IS_TS id=iNameHyperlinkRozw />'': rearrangement of the sections and fields in '' <IS_TS id = DataEditorTable /> '' for '' <IS_TS id = SchematicStartPointNameSingle /> ''
+'''<IS_TS id=PH_IS5_H/>''' / '''<IS_TS id=PH_IS5_C/>'''
+* New elements: single manifold, pipe-run ''<IS_TS id=iNameCODzialkaOdpowietrzenie/>'', ''<IS_TS id=pinNameZaworBezp/>''
+* The ''<IS_TS id=iNameCOElementONarzOporze/>'' element has been given a new option to define a default distance from the floor, separately for each storey
+* Elements: '' <IS_TS id = iNameCOReduktorTemp /> '' and '' <IS_TS id = iNameCOWezelRegulacyjny /> ''<br clear="all"/> - Possibility to choose the level of detail in presentation of these elements  separately on individual views: 2D, 3D and schematic view (watch the video)<br clear="all"/> - Possibility to define the dimensions of these elements on ''<IS_TS id=iNameHyperlinkRozw />'' sheet regardless of the dimentions on 2D/3D views (watch the video)<br clear="all"/> - New fields: ''<IS_TS id = MixerDefWidthOnSchematic />'' and ''<IS_TS id = MixerDefHeightOnSchematic />'' in ''<IS_TS id = DataEditorTable />'' for  ''<IS_TS id=SchematicStartPointNameSingle/>'' allows to define default dimensions of these elements on a particular ''<IS_TS id = iNameHyperlinkRozw />'' sheet
+'''<IS_TS id=PH_IS5_HL/>'''
+* Calculations of the heat load of the building in accordance with ÖNORM EN 12831 + H-7500-1
+* Optimization of the ''<IS_TS id = ObliczeniaCieplneBudynku/>'' algorithm, what may reduce time of the calculations
+'''<IS_TS id=PH_IS5_RL/>'''
+* Two-parameter manifolds, integrating the high- and low- temperature part and the mixing unit (watch the video)
+* New template of manifold chart, dedicated to industrial systems
+* New checkbox ''<IS_TS id=strChbNiePokazujSystemowAutomatykiZKataloguInnegoNizRozdzielacz/>''
+* Acceleration of the supply temperature optimization  algorythm, what may reduce time of the calculations
+'''<IS_TS id=PH_IS5_TEX/>'''
+* Three-way mixing valves, reducing the temperature of hot water (watch the video)
+===RELEASE Rev. 18.5===
+* Update of product catalogues.
+===RELEASE Rev. 18.4===
+'''<IS_TS id=PH_IS5_C/>'''
+* Method of determining the specific heat of the medium filling the installation has been improved.
+===RELEASE Rev. 18.3===
+* Update of product catalogues.
+===RELEASE Rev. 18.2===
+* Update of product catalogues.
+===RELEASE Rev. 18.0===
+{{#ev:youtube|g8k_wwlshzw  |300|left|}}<br clear="all"/>
+'''<IS_TS id=PH_ISNS5_BASE/>'''
+* Change of the program architecture to 64-bit. That means there is a possibility to use all of the computer's RAM available. Previous publications, which were in 32-bit architecture, could only use 4GB of RAM.
+* Improvements in the program performance:<br clear="all"/> - faster response to switching between two types of elements ''<IS_TS id=strArkuszRoboczy/> ''<br clear="all"/> - faster loading of ''<IS_TS id=View3D/>'' content <br clear="all"/> - faster opening of files containing ''<IS_TS id=iNameDWGBackground/>''<br clear="all"/> - reduced time of ''<IS_TS id=BuildingStructureCalculation/>''<br clear="all"/> - reduced time of ''<IS_TS id=ObliczeniaCieplneBudynku/>''
+* Improvements of the algorithm which creates ''<IS_TS id=iNameHyperlinkRozw/>''
+* New diagnostic messages related to the function ''<IS_TS id=iNameHyperlinkRozw/>''.<br clear="all"/> The contested elements are indicated in the graphic editor.
+* New graphic presentation of the ''<IS_TS id=SchematicEndPointNameSingle/>'' for schematic view.
+* Symbols of the element ''<IS_TS id=SchematicStartPointNameSingle/>'' are generated automatically after using the function ''<IS_TS id=GenerateStoreysButton/>'' for ''<IS_TS id=iNameHyperlinkRozw/>''.
+* Selection of item ''<IS_TS id=FragmentSubstitutionOnSchematic/>'' on ''<IS_TS id=ArkuszTypuRozwiniecie/>'' references to item ''<IS_TS id=SchematicEndPointNameSingle/>'' on ''<IS_TS id=ArkuszTypuPlanRzut/>''.
+* New hints on Status Bar informing about active keys during insertion of the elements.
+* Improved ''<IS_TS id=strAUTOModeName/>'' mode and ''<IS_TS id=strORTOModeName/>'' mode for drawing of building structure.
+* Possibility to edit ''<IS_TS id=Roof/>'' element on ''<IS_TS id=View3D/>''.
+* Possibility to define roof slope with automatic calculation of elevation of ordinates for ''<IS_TS id=Roof/>''.
+* Dormers are included in calculations of ''<IS_TS id=strl_expidISFPomieszczenieKubatura/>''.
+* Change in organization of Ribbon in ''<IS_TS id=lystrFloors/>'' section:<br clear="all"/> - Buttons are sorted in order of recommended path of use for building structure designing <br clear="all"/> - Button  ''<IS_TS id=PartitionsGenerator/>'' moved to the ''<IS_TS id=lystrFloors/>'' section.
+* New diagnostic related to wall connections after using  ''<IS_TS id=PartitionsGenerator/>'' function,  informing about detected irregularities.
+* New ''<IS_TS id=strLblWygladCaption/>'' 2D and 3D on ''<IS_TS id=lystrFloors/>'' scope supporting the design and verification of the building structure.
+* New tool ''<IS_TS id=CorrectWallGeometry/>'' enables automatic correction of building structure by using functions:<br clear="all"/> - ''<IS_TS id=CorrectWallConnections/>''<br clear="all"/>- ''<IS_TS id=CorrectWallThickness/>'', enables getting the same walls thickness in entire project.<br clear="all"/>- ''<IS_TS id=CorrectWallAngles/>'',  enables the correction of parallelism / perpendicularity of walls relative to each other <br clear="all"/>- ''<IS_TS id=CorrectWallShifts/>'', enables the correction of the position and displacement of walls between storeys with the possibility of indicating a reference storey.<br clear="all"/> Tool is available on Ribbon in ''<IS_TS id=lystrFloors/>'' section.
+* New, precise diagnostic messages for ''<IS_TS id=BuildingStructureCalculation/>'', facilitate correct edition of the building structure.
+* Improvement of diagnostic message: ''<IS_TS id=ScianyNakladajaSieAlboBledniePolaczone/>'' -  messages are grouped and there is more precise indication of walls affecting incorrect ''<IS_TS id=BuildingStructureCalculation/>'' <br clear="all"/>
+* Possibility of more accurate location of the ''<IS_TS id=iNameReferencePoint/>'' element because of more accurate impact of  ''<IS_TS id=strAUTOModeName/>'' mode for snapping to DWG underlays elements (also axis)
+* New ''<IS_TS id=iNameZnacznikPomWielokondygnacyjnego/>'' in ''<IS_TS id=strl_stridISFPomieszczenieIsMultiStorey/>'' label.
+'''<IS_TS id=PH_IS5_H/>'''
+* Added ''<IS_TS id=CreateLabelsAutomaticallyCaption/>'' for ''<IS_TS id=DzialkaPrzylacze/>'' in ''<IS_TS id=rpCreateSchematicStartPointT/>'' data.
+'''<IS_TS id=PH_IS5_HL/>'''
+* The user interface was changed in the scope of specific data of rooms and building units, unifying it with other program modules. Special editors have been left for cooling partitions in rooms and for partition definitions.
+* Improvements in ''<IS_TS id=ObliczeniaCieplneBudynku/>'' based on a properly defined building structure..
+'''<IS_TS id=PH_IS5_T/>'''
+*  The possibility of calculations according to the EN 806-3 standard.
+* '''<IS_TS id=iNameHyperlinkRozw/>''' -  new functionality available  -  BETA version
+===RELEASE Rev. 17.5===
+* Update of product catalogues.
+===RELEASE Rev. 17.4===
+* Update of product catalogues.
+===RELEASE Rev. 17.3===
+* Update of product catalogues.
+====Articles in HelpSystem:====
+* [[Automatically generate schematic views]]
+===RELEASE Rev. 17.2===
+* Update of product catalogues.
+====Articles in HelpSystem:====
+* [[Designing sanitary system loop installations]]
+* [[How to make the program run faster]] (actualized)
+* [[Introduction to the work with the package InstalSystem 5]] (actualized)
+* [[List of standards and methods used for sizing and calculations]] (actualized)
+* [[Package technical specifications]] (actualized)
+* [[Problems with the application on computers with integrated graphics card]] (actualized)
+===RELEASE Rev. 17.1===
+* Update of product catalogues.
+===RELEASE Rev. 17.0===
+{{#ev:youtube|4xiQAQT08mE |300|left|}}<br clear="all"/>
+'''<IS_TS id=PH_ISNS5_BASE/>'''
+* When inserting an opening in a sloping roof plane, the "z" coordinates  of corner points are determined automatically
+* In the ''<IS_TS id=StoreyManagement/>'' window, the values ''<IS_TS id=strLblRzednaKondCaption/>'' and ''<IS_TS id=strLblWysokoscKondygnacjiCaption/>'' are editable, and the complement each other for adjacent stories
+* For the top floor, ''<IS_TS id=RzednaSzczytuDachuCaption/>'' property has been added, the change of which corrects the height of that floor
+* The option of distinguishing the style and label of a "manual" room (drawn directly) from "automatic" (generated automatically based on the arrangement of walls and slabs) has been introduced.
+* When drawing elements "roof edge", ''<IS_TS id=rpOtworWdachu/>'', ''<IS_TS id=Lukarna/>'' in AUTO mode, snapping to DWG base elements is carried out
+* In the calculations of the building structure, ''<IS_TS id=ScianyNakladajaSieAlboBledniePolaczone/>'' diagnostics was introduced. The contested elements are indicated in the graphical editor
+* In the ''<IS_TS id=btUstawienia/>'' tab, sub-tab: ''<IS_TS id=btUstawieniaWygladEkranu/>'', checkbox ''<IS_TS id=disableAdvancedTransparency/>' has been added. Checking can make it easier to work on computers with weaker graphics cards.
+* The '''<IS_TS id=pcstrXY/>'' tab has been added to the configuration of element label styles, where you can specify the default position of the label relative to the parent.
+'''<IS_TS id=PH_IS5_H/>'''
+* ''<IS_TS id=iNameHyperlinkRozw/>'' - new functionality available - BETA version
+* The ''<IS_TS id=iNameCOKociol/>'' element was introduced as one of the possible properties of the element ''<IS_TS id=iNameCOZrodlo/>'' in the field ''<IS_TS id=strpnZrodloWyglad/>''
+* Enabled declaration of dimensions of ''<IS_TS id=iNameCOElementONarzOporze/>'' element from 1 cm.
+'''<IS_TS id=PH_IS5_RL/>'''
+* Ergonomy of corrections of pipe loops and pipe feeds drawings generated automatically and drawn manually has been improved.
+* New criterion of pipe feeds arrangement -AUTO- has been added to ''<IS_TS id=rpStrefaPrzylaczy/>'' tool.
+'''<IS_TS id=PH_IS5_RP/>'''
+* In the general data and in the data table of the element ''<IS_TS id=strefaPaneliSufitowych/>'' the possibility of declaration of automatic placement of adjacent rows of panels in the zone with mutual offset has been introduced.
+'''<IS_TS id=PH_IS5_T/>'''
+* For sanitary appliances, it is possible to declare the frame.
+* A declaration of default manifold types has been introduced in the general data.
+====Articles in HelpSystem:====
+* [[Heat source dimensioning for installations with flat stations]]
+* [[Installation with convective heating and water supply system with use of flat stations in a multifunctional building]]
+* [[Terminal unit]]
+===RELEASE Rev. 16.2===
+* Update of product catalogues.
+====Articles in HelpSystem:====
+* [[Designing of water supply system installation]]
+* [[Heating/cooling zone build-up editor]] (actualized)
+* [[How to eliminate: "Cannot apply any pipe spacing"]]
+-->
+<!--===RELEASE Rev. 16.1===
+* Update of product catalogues.
+====Articles in HelpSystem:====
+* [[General recommendations for users of InstalSystem 4 starting work with InstalSystem 5]]
+===RELEASE Rev. 16.0===
+{{#ev:youtube|9zFFUsSOQHc|300|left|}}<br clear="all"/>
+'''<IS_TS id=PH_ISNS5_BASE/>'''
+* Many elements of the installation (radiator, valve, pump, etc.) by default are inserted with label.
+* Possibility of precise control of pipe-runs arrangement, with different ordinates of the beginning and end of the pipe-run (case of pipe-runs carried out in inclined ceilings / walls).
+'''<IS_TS id=PH_IS5_H/>'''
+* Possibility to declare (''<IS_TS id=rsDanogi/>'' window, ''<IS_TS id=StoreyManagement/>'' tab) the default distance from the floor separately of the supply and return pipe-runs.
+'''<IS_TS id=PH_IS5_T/>'''
+* Possibility to declare (''<IS_TS id=rsDanogi/>'' window, ''<IS_TS id=StoreyManagement/>'' tab) the default distance from the floor separately of the hot water, cold water and circulation pipe-runs.
+* Rearrangement of general data tabs.
+* New element of the installation - linear drain.
+'''<IS_TS id=PH_IS5_SM/>'''
+* New module enabling the design of heating and water supply installations with the use of flat stations.
+====Articles in HelpSystem:====
+* [[Calculation of design heat load of rooms]] (actualized)
+* [[Manifold and accessories]] (actualized)
+* [[Pipe feeds route and editing pipe feeds in a radiant system]] (actualized)
+* [[Pipe feeds route - Good practices and use cases]] (actualized)
+===RELEASE Rev. 15.3===
+* Update of product catalogues.
+===RELEASE Rev. 15.2===
+* Update of product catalogues.
 ===RELEASE Rev. 15.1===
@@ Line 106: / Line 545: @@
 ===RELEASE Rev. 12.2===
 ====Modules:====
-'''InstalSystem Base module and Package Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' ''<IS_TS id=PH_5_PM/>'''''
 * Improvement of Autosave function
-'''Cooling systems'''
+'''''<IS_TS id=PH_5_C/>'''''
 *  Implemented cooling system module - availability depending on  package
 ===RELEASE Rev. 12.1===
-* There were no significant functional changes in this release.
+* Update of product catalogues.
 ===RELEASE Rev. 12.0===
 ====Modules:====
-'''InstalSystem Base module and Package Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Improvement of ''<IS_TS id=strAUTOModeName/>'' mode.
 * Diagnostics of available graphics cards.
-'''Radiator sizing'''
+'''''<IS_TS id=PH_IS5_DOG/>'''''
 * Display of radiator output for manually selected sizes through the ''<IS_TS id=DataEditorTable/>''.
-'''Radiant panel systems'''
+'''''<IS_TS id=PH_5_RP/>'''''
 * Improvement of readability of ''<IS_TS id=iNameTabelkaRozdzielacza/>''.
 * Improvement of algorithm determining drop of temperature on the set of serially connected panels.
@@ Line 129: / Line 568: @@
 ===RELEASE Rev. 11.0===
 ====Modules:====
-'''InstalSystem basis and Package Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>''''
 * Improved function ''<IS_TS id=PartitionsGenerator/>''.
 * Improved zoom scale and the preview scale.
@@ Line 136: / Line 575: @@
 * Integration of ''<IS_TS id=PaperFormat/>'' element with ''<IS_TS id=PrintoutPages_ElementName/>'' element.
-'''Radiant loop systems'''
+'''''<IS_TS id=PH_IS5_RL/>'''''
 * Improved algorithm of heat output calculations of ''Heated by pipe feeds'' floor type connected virtually.
 * Improved algorithm which automatically inserts a heating/cooling floors into rooms with a hole in the slab.
-'''Heating systems'''
+'''''<IS_TS id=PH_IS5_H/>'''''
 * Improved automatic connections of integrated radiators to distrubution pipes, depending on the configuration: valve shape (straight, angle) and connection direction (from the floor, from the wall).
-'''Radiant panel systems'''
+'''<IS_TS id=PH_IS5_RP/>'''
 * Improved flow rates calculations for the serial-connected panels.
 ===RELEASE Rev. 9.2===
-* There were no significant functional changes in this release.
+* Update of product catalogues.
 ===RELEASE Rev. 9.1===
-* There were no significant functional changes in this release.
+* Update of product catalogues.
 ===RELEASE Rev. 9.0===
 ====Modules:====
-'''InstalSystem basis and Package Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Added declare multi-wing doors and windows.
 * Added the appearance configuration of the ''<IS_TS id=iNameReferencePoint/>''.
 * ''AUTO'' mode has been extended of snap the vertices ''<IS_TS id=rpOtworWstropie/>'' to elements from the DWG underlay.
-'''Radiant loop systems'''
+'''''<IS_TS id=PH_5_RL/>'''''
 * Improved algorithm of insert ''Heating floor'' in multi-storey rooms (with ''Opening in slab'').
 * Implemented automatic algorithm which cuts ''Heating wall'' lying in the area of windows / doors.
-'''Heat loss (thermal load)'''
+'''''<IS_TS id=PH_5_HL/>'''''
 * Added the possibility of defining ''Tolerance relative to thickness of graphical partition'' (wall, ceilings and roofs), that the ''Partition definitions'' will be assign.
-'''Radiant panel systems'''
+'''''<IS_TS id=PH_5_RP/>'''''
 * Improved determination of the optimal refrigerating level (Δθ) for the serial-connected panels.
 * Maximum height position for the panels has been increased to 30 m.
@@ Line 173: / Line 612: @@
 ===RELEASE Rev. 8.0===
 ====Modules:====
-'''InstalSystem basis and Package Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Improved diagnostics for incomplete data when ''Generate walls and slabs from rooms and building contour'' algorithm has launched.
 * Room label - added the ability of display the ''<IS_TS id=sOpis/>'' field.
@@ Line 180: / Line 619: @@
 * Improved the ergonomy of filling graphic elements data.
-'''Heat loss (thermal load)'''
+'''''<IS_TS id=PH_5_HL/>'''''
 * Changed diagnostics from error to warning for ''Partition definitions'' with no thickness filled for ''Part. with specified U (Heat transfer coefficient)''.
 ===RELEASE Rev. 7.3===
-* There were no significant functional changes in this release.
+* Update of product catalogues.
 ===RELEASE Rev. 7.2===
 ====Modules:====
-'''InstalSystem basis and Package Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * New diagnostic messages for incorrect or incomplete building structure data have been introduced.
 * The rank of the message with zero thickness of the partition definition has been reduced to a warning or hint (when the definition has no default status).
-'''Radiant panel systems'''
+'''''<IS_TS id=PH_5_RP/>'''''
 * "Zone of ceiling panels" tool has been improved and developed.
@@ Line 200: / Line 639: @@
 ===RELEASE Rev. 6.1===
 ====Modules:====
-'''InstalSystem basis and Package Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Added A0 and A1 formats to printout pages.
 * Improved AUTO and ORTO modes.
-'''Radiator sizing'''
+'''''<IS_TS id=PH_IS5_DOG/>'''''
 * Added possibility to display in radiator’s label setting of valves insert.
 * Allowed defining in project options default distance of radiator from wall.
 * Improved graphical presentation of radiators mounting items (so-called consoles) on plan views.
-'''Radiant loop systems'''
+'''''<IS_TS id=PH_5_RL/>'''''
 * Added possibility to choose criterion of supply temperature optimization in radiant systems with correction of the algorithm's operation.
 * Improved algorithm of automatic division Heating/Cooling Zones into Heating/Cooling Areas.
@@ Line 221: / Line 660: @@
 ===RELEASE Rev. 5.1===
-* There were no significant functional changes in this release.
+* Update of product catalogues.
 ===RELEASE Rev. 5.0===
 ====Modules:====
-'''InstalSystem basis and Package Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Added dimension lines.
-'''Radiant loop systems'''
+'''''<IS_TS id=PH_5_RL/>'''''
 * Improved the algorithm of automatic division of heating/cooling floor zone.
 * Improved presentation of RHC loop drawing on 3D view.
@@ Line 245: / Line 684: @@
 ===RELEASE Rev. 4.0===
 ====Modules:====
-'''Radiant loop systems'''
+'''''<IS_TS id=PH_5_RL/>'''''
 * Improved the algorithm drawing the RHC loop.
-'''Radiant panel systems'''
+'''''<IS_TS id=PH_5_RP/>'''''
 * Added ceiling panels zone - tool for automatic stacking of ceiling panels.
@@ Line 260: / Line 699: @@
 ===RELEASE Rev. 2.2===
 ====Modules:====
-'''InstalSystem basis and Package Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Added possibility to saved files read-only.
 * 3D view printout has been avaliable.
@@ Line 271: / Line 710: @@
 ===RELEASE Rev. 2.1===
-* There were no significant functional changes in this release..
+* Update of product catalogues.
 ===RELEASE Rev. 2.0===
 ====Initial scope of modules:====
+* '''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
-* '''InstalSystem basis and Package Manager'''
+* '''''<IS_TS id=PH_5_HL/>'''''
-* '''Heat loss (thermal load)'''
+* '''''<IS_TS id=PH_IS5_DOG/>'''''
-* '''Radiator sizing'''
+* '''''<IS_TS id=PH_5_RL/>'''''
-* '''Radiant loop systems'''
+* '''''<IS_TS id=PH_5_RP/>'''''
-* '''Radiant panel systems'''
+* '''''<IS_TS id=PH_5_RLD/>'''''
-* '''Radiant loop dry systems'''
+* '''''<IS_TS id=PH_5_H/>'''''
-* '''Heating systems'''
+* '''''<IS_TS id=PH_5_C/>'''''
-* '''Radiant cooling systems'''
 * '''Interface gbXML (BIM)'''
+-->
-====Initial state of information materials====
+<!--====Initial state of information materials====
-* [[InstalSystem 5]]
+* [[InstalSystem 5]]-->
 <!--* TUTAJ DODAĆ LINK DO STRONY WWW Z PRODUKTAMI INSTALSYSTEM 5-->
 <!--===Version BETA Rev. 2.0.B5===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>''''
 * Introduced term licences as additional licensing option (available for selected packages) with mechanisms supporting term and renewal control (''Change license'' tab),
 * Introduced demo version (available for selected packages).
@@ Line 304: / Line 742: @@
 ===Version BETA Rev. 2.0.B4===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''
 * Put in order access to the most important diagnostic messages.
 * Diagnostics has been added to report errors during roof generating.
@@ Line 313: / Line 751: @@
 * Changed the name of the ''Upgrade'' button in Manager for ''Licence change'' button while preserving its original functionality.
-'''Heat loss (thermal load)'''
+'''''<IS_TS id=PH_5_HL/>'''''
 * The format ''Heat losses data'' moved from the ''H&E'' window to the ''General Data'' window.
-'''Radiant heating - loop systems'''
+'''''<IS_TS id=PH_5_RL/>'''''
 * Added the ability to define the default type of 3D valve in the mixer.
 * The default mixer size has been corrected.
@@ Line 322: / Line 760: @@
 ===Version BETA Rev. 2.0.B3===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Edit tabs in graphical editor got two new states of visibility:
 ** ''Translucent when active''  - useful when analyzing the partition definitions and graphics partitions in 3D.
 ** ''The only one visible when inactive'' - automatically inactivates other ranges, regardless of their own settings.
-'''Heat loss (thermal load)'''
+'''''<IS_TS id=PH_5_HL/>'''''
 * Multi-storey rooms  are recognized (equivalent to ''interconnected rooms'' in version 4). A multi-storey room is automatically created in the absence of a slab between rooms on adjacent floors when the slab does not cover the whole projection of the room or when the slab has an active opening in slab.
 * It is possible to select partition definitions as ''default for this type and dimensions'' also in the project browser tree, using the pop-up menu.
@@ Line 338: / Line 776: @@
 ===Version BETA Rev. 2.0.B2===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Fixed walls connecting generated automatically by the partitions generator.
 * Fixed connecting fragments of the underlay in .pdf format.
@@ Line 344: / Line 782: @@
 * Allowed quickly switching between worksheets in a graphical editor using the arrows next to the selection window of the worksheets.
-'''Radiant heating - loop systems'''
+'''''<IS_TS id=PH_5_RL/>'''''
 * Moved window of control circuit settings to Thermal systems sources in the General Data.
 * Allowed to replace virtual temperature sources with graphic elements by ugins a special button in the control circuit settings in the General Data.
@@ Line 350: / Line 788: @@
 ===Version BETA Rev. 2.0.B1===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Introduced the ability to search elements in the Project browser based on a string of signs.
 * Allowed to insert dormers.
@@ Line 362: / Line 800: @@
 ===Version BETA 37 Rev. 0.0.B37===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Improved efficiency of the program in handling with complex projects, time of files upload and regeneration of the 3D view.
-'''Radiator sizing'''
+'''''<IS_TS id=PH_5_DOG/>'''''
 * Added the ability to search of radiators and valves placed on the radiators in the search window of elements in the project.
-'''Heat loss (thermal load)'''
+'''''<IS_TS id=PH_5_HL/>'''''
 * Introduced heat loss (thermal load) module in accordance with standard EN 12831.
@@ Line 377: / Line 815: @@
 ===Version BETA 35 Rev. 0.0.B35===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Raising the ergonomics of editing the roof by multiedit few vertices at the same time.
 * Merge and trim functions identify the premises in one operation.
@@ Line 396: / Line 834: @@
 ===Version BETA 34 Rev. 0.0.B34===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Improved import files created in InstalSystem 4 for automatic deletion of elements that are not supported in InstalSystem 5.
 * Improved ''Wall'' connection.
 * Integrated a full range of Construction processing operations.
-'''Radiator sizing'''
+'''''<IS_TS id=PH_5_DOG/>'''''
 * Expanded radiator sizing in ''Addition for thermostat'' and ''Addition for casing/chanel''.
 * Expanded operations on the elements ''Radiators'' about the possibility of ''Flip horizontal''.
@@ Line 413: / Line 851: @@
 ===Version BETA 33 Rev. 0.0.B33===
 ====Modules:====
-'''Radiant heating - loop systems'''
+'''''<IS_TS id=PH_5_RL/>'''''
 * Improved the data propagation from ''Room'' elements created with walls to the ''Heating/Cooling Wall Zone'' elements.
-'''Radiator sizing'''
+'''''<IS_TS id=PH_5_DOG/>'''''
 * Improved the data propagation from ''Room'' elements created with walls to the ''Radiator'' elements.
 ===Version BETA 32 Rev. 0.0.B32===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Introduced the ability of creating rooms due to other building structure's elements inserted in the project.
 * Introduced the ability of dividing roof into parts and added new functionality which allows to change ordinates of individual points at the roof's outline to model its real surface.
@@ Line 428: / Line 866: @@
 * Increased the ergonomy of label editor.
-'''Radiator sizing'''
+'''''<IS_TS id=PH_5_DOG/>'''''
 * Introduced radiator sizing in basic scope. This functionality will be completed and developed in the next beta versions.
@@ Line 436: / Line 874: @@
 ===Version BETA 31 Rev. 0.0.B31===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Introduced a new conception for wall element and the functionality of connecting walls.
 * Indroduced new physical element - the slab.
@@ Line 442: / Line 880: @@
 * Expanded function "Shadow of a storey" for possibility to declare shadows displayed for all stories below.
-'''Radiant heating - panel systems'''
+'''''<IS_TS id=PH_5_RP/>'''''
 * Introduced possibility of calculating thermal output of ceiling/wall panels according to EN 1264 standard.
@@ Line 450: / Line 888: @@
 ===Version BETA 30 Rev. 0.0.B30===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Allowed to control the content of diagnostic messages using the checkbox "Messages for selected components" on the list of filters in the diagnostics window.
 * Introduced the possibility to handle by the distribution system mail domains with the sign "-".
-'''Radiant heating - panel systems'''
+'''''<IS_TS id=PH_5_RP/>'''''
 * Taken into account results for panels in the radiant heating general results.
 * Introduced the presentation of panels connection points on 3D view.
@@ Line 465: / Line 903: @@
 ===Version BETA 29 Rev. 16.5.1===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Allowed handling of mail domains containing sign "-" by the licence distribution system.
 * Improved stability of the program during pasting complex installations.
@@ Line 471: / Line 909: @@
 * For each element with snapping possibility added the ability to set in the AUTO mode a parameter which predetermine distance from the edge of another inserted element.
-'''Radiant heating - loop systems'''
+'''''<IS_TS id=PH_5_RL/>'''''
 * Corrected a bug related to the manual connecting RHC loop directly to the manifold (without pipe-runs).
-'''Radiant heating - panel systems'''
+'''''<IS_TS id=PH_5_RP/>'''''
 * Allowed the presentation of data in the printout of 'Manifold table' for panel systems installation.
-'''Radiant heating - dry systems'''
+'''''<IS_TS id=PH_5_RLD/>'''''
 * Introduced dry system to the neutral catalogue of radiant heating systems.
@@ Line 487: / Line 925: @@
 ===Version BETA 28 Rev. 16.4.1===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Improved the automatic snapping of pipe-runs for the ORTO mode.
 * Improved the function of rooms interpretation for files imported from '''[[InstalSystem 4]]''' package.
 * Introduced the ability to insert into the project construction elements: ''Wall'', ''Window'', ''Door'', ''Opening in wall''.
-'''Radiant heating - panel systems'''
+'''''<IS_TS id=PH_5_RP/>'''''
 * Introduced the possibility to insert into the project element ''Ceiling false panel'' (panel with no connection).
 * Added the cooling result card for panel installation: ''General results cooling''.
@@ Line 499: / Line 937: @@
 ===Version BETA 27 Rev. 16.3.1===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Improved function 'automatically connect terminal units'.
 * Made available the ability to configure the buttons to select a group of elements (SHIFT and CTRL).
@@ Line 506: / Line 944: @@
 * Added the function of the graphic presentation of routes flow from the source (manifold, source) to all receivers, which it supplies.
-'''Radiant heating - dry systems'''
+'''''<IS_TS id=PH_5_RP/>'''''
 * Introduced handling underfloor panels which lead the pipes in dry systems of radiant heating.
 ===Version BETA 26 Rev. 16.2.1===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''',<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Improved saving files in a network location.
 * Introduced the possibility to choose the source for which you want to appear the critical circuit.
@@ Line 517: / Line 955: @@
 ===Version BETA 25 Rev. 16.1.1===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Added function that allows automatically connect terminal units.
 * Added possibility of quick creating rectangular room with sides parallel to the X, Y by drawing diagonal of the room.
 * The problem with sending Problem Report Form is eliminated.
-'''Radiant heating - panel systems'''
+'''''<IS_TS id=PH_5_RP/>'''''
 * Added function that allows connect panels in series.
 * Introduced the possibility to design heating/cooling installations using ceiling/wall panels (including radiant steel ceiling panels).<br/>''Attention! Required upgrade to the configuration with the new module (InstalSystem Manager - tab "Upgrade").
@@ Line 536: / Line 974: @@
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Improved stability and quality of the program.
-'''Radiant heating - loop systems'''
+'''''<IS_TS id=PH_5_RL/>'''''
 * Added a message about the lack of possibility for editing automatically generated pipe feeds/RHC loops.
 * Standarized the content of data table for heating/cooling zones at various ranges of editing.
@@ Line 551: / Line 989: @@
 ===Version BETA 23 Rev. 15.11.1===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Fixed the problem with sending the Problem report form.
 * Added icons for the .isproj files displayed in the InstalSystem Manager and in the Windows Explorer's window.
 * The scope of the displayed catalogues in the general data has been adapted to the available project scope for the package.
-'''Radiant heating - loop systems'''
+'''''<IS_TS id=PH_5_RL/>'''''
 * Changed the designation of nodes in the grid which supports the manual drawing of the loop.
 * Added message box indicating the inability to remove the RHC loop.
-'''Heating network with balancing'''
+'''''<IS_TS id=PH_5_H/>'''''
 * Fixed the automatic sizing of manifolds' cabinets.
 * Improved the propagation of the default data for manifold cabinet.
@@ Line 572: / Line 1,010: @@
 ===Version BETA 22 Rev. 15.10.1===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Added graphical rulers (horizontal and vertical) to help verify the scale of loaded underlay.
 * Improved ORTO and AUTO modes.
@@ Line 584: / Line 1,022: @@
 ===Version BETA 21 Rev. 15.9.2===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Modified the way of importing base drawing files.
 * Added a ''Select components in rectangle'' function under the left mouse button.
@@ Line 590: / Line 1,028: @@
 * Accelerated loading of the newly created or saved again files, as a consequence the files created on previous versions may load slower.
-'''Radiant heating - loop systems'''
+'''''<IS_TS id=PH_5_RL/>'''''
 * Added the possibility of parallel connection of several RHC loop to one common outlet from the manifold.
 * Introduced balance diagnostics of the RHC loop connected to the manifold with not integrated balancing valves, and the possibility of adding on the pipe-runs valves which are balancing these objects.
-'''Heating network with balancing'''
+'''''<IS_TS id=PH_5_H/>'''''
 * Added the possibility to use multi-circuit heating floor zone.
 * Introduced balance diagnostics of the circuits by the heating floor zones in the systems without the manifold.
@@ Line 607: / Line 1,045: @@
 ===Version BETA 16.1 Rev. 15.5.17===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Added new tool to search and select items in the project.
 * Improved the import and export of bases.
@@ Line 614: / Line 1,052: @@
 * Added the possibility to highlight on the worksheet elements forming the circuit of specified receptor from this worksheet.
-'''Radiant heating - loop systems'''
+'''''<IS_TS id=PH_5_RL/>'''''
 * Improved the functionality of pipe feed automatic generation.
@@ Line 622: / Line 1,060: @@
 ===Version BETA 15.1 Rev. 15.4.21===
 ====Initial scope of modules:====
-* '''Base module, including InstalSystem Manager'''
+* '''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
-* '''Radiant heating - loop systems'''
+* '''''<IS_TS id=PH_5_RL/>'''''
-* '''Cooling mode for radiant systems'''
+* '''''<IS_TS id=PH_5_C/>'''''
-* '''Heating network with balancing'''
+* '''''<IS_TS id=PH_5_H/>'''''
-* '''BIM Interface (gbXML)'''
+* '''''<IS_TS id=PH_5_gbXML/>'''''
 ====Initial state of articles in HelpSystem====
 * [[Technical specifications of InstalSystem 5 package]]
@@ Line 633: / Line 1,071: @@
 [[Category:InstalSystem 5]]
 [[Category:PRODUCT INFORMATION]]
-[[it:Informazioni sulle pubblicazioni InstalSystem 5]]
+__NOTOC__
-[[pl:Informacje o publikacjach InstalSystem 5]]
-[[lt:InstalSystem 5 Pastabos apie versiją]]
+<!-- Do not write text below this tag -->
-[[bg:Информация относно промени в InstalSystem 5]]
+<br class="iwlinks"/>[[pl:Informacje o publikacjach InstalSystem 5|Informacje o publikacjach InstalSystem 5]][[it:Informazioni sulle pubblicazioni InstalSystem 5|Informazioni sulle pubblicazioni InstalSystem 5]][[zh-cn:InstalSystem 5 版本更新说明|InstalSystem 5 版本更新说明]][[bg:Бележки към издание InstalSystem 5|Бележки към издание InstalSystem 5]][[lt:InstalSystem 5 Pastabos apie versiją|InstalSystem 5 Pastabos apie versiją]]
-[[zh-cn:InstalSystem 5 版本发布说明]]

Release notes InstalSystem 5: Difference between revisions

Latest revision as of 16:02, 23 February 2026

Navigation menu

Search