How to properly connect manifold with heating/cooling zone using pipe feeds route
Jump to navigation
Jump to search
| Product | InstalSystem 5 |
| Type of article | TIP&TRICK |
| Source for translation | 2017-08-31 |
Problem description
Connecting manifold with heating/cooling zone using pipe feeds route may be problematic, especially when manifold is located inside a room e.g. in situations when on wall manifold cabinet is used.
Solution
- Cut the piece of heating/cooling zone lying beneath the manifold using "Surface division without expansion joint" function
- Separate extra heating/cooling zone beneath the manifold and set its type as "Without pipes"